Dimensional data, metrics and ratios
LOD 53′ 9″ (16.4m)
LWL 46′ 11″ (14.3m)
Beam 15′ 3.5″ (4.7m)
BWL 11′ 5″ (3.5m)
LWL / B 3.06
Draft (half load) 7′ 6″ (2.3m)
Freeboard amidships = 53” (1.4m)
Air draft ~ 80′ (24m) = 73.6′ (masthead above deck) + 6′ (partners to waterline) depending on antennas

DISP (half load) 44,600 lbs (20.230kg)
Ballast 16,610lbs (7.534kg)
DISP / L (half load) 194
Ballast / DISP 37%

I 66′ 3″ (20.2m) – jib halyard sheave to deck
J 19′ 1″ (5.8m) – front of mast to forestay
P 66′ 4″ (20.2m) – luff of the main
E 21′ 3″ (6.5m) – foot of the main

Main 705 sq ft (65.5 m2)
Jib 632 sq ft (58.7 m2)
Staysail 215 sq ft (20.0 m2)
Asymmetrical spinnaker 1,830 sq ft (170 m2)

SA (I,J,P,E) 1,337 sq ft (124.2 m2)
SA (IMS) 1,479 sq ft (137.4 m2)
SA / DISP (IMS) 18.73
SA / DISP 16.88

J of staysail 11′ 11″ (3.5m)
I of staysail 44′ 5″ (13.5m)

ISP 73′ 3″ (22.3m) – spinnaker halyard to deck

Fuel 287 gal (1.086 liter): 50 gal (189.3 liter) day tank + bunker tanks of 45, 52, 70 and 70 (170, 197, 265 and 265 liter)
Water 145 gal (549 liter): 100 gal (379 liter) working tank + 45 gal (170 liter) reserve tank
Black water: 26 gal (98 liter) – forward, 10 gal (37.8 liter) – aft

Engine
Yanmar 4JH4-HTE 110hp diesel with turbocharger
Yanmar KM4A2 2.63:1 transmission
Drive shaft: 2″ (51mm) diameter Aquamet 22 stainless steel
Propeller: Gori 3 blade folding 22″ x 17 RH (55,9cm x 43,2cm)

Construction
Hull: E-glass over A-rated Corecell, SCRIMP infused with Derakane 8084 vinylester resin
Deck: Hand laminated E-glass with Derakane 441-800 PAT vinylester resin and A-rated Corecell core (though large areas are without core)

Interior
Joinery: Maple
Sole: Teak
Varnish: Epifanes Matte
Paint: (heads): Oyster
Paint (engine room and hull interior): Snow White

Exterior paint
Topsides: AwlGrip Matterhorn White G8003
Boot stripe: AwlGrip Royal Blue G5007
Bottom paint: Pettit Vivid White
Deck: AwlGrip Matterhorn White G8003
Non-skid: AwlGrip Matterhorn White G8003 / Whisper Gray G8035 (50% / 50%)